Synthesis of thermally stable aromatic poly(spiroorthocarbonate)s having a Cardo or bent structure

Novel poly(spiroorthocarbonate)s [poly(SOC)]s having a Cardo or bent structure were synthesized by polycondensation of several bis‐catechols having fluorene (BCFL), spirobisindane (BCSPI), or spirobischromane (BCSPC) in the structure with 2,2,6,6‐tetrachlorobenzo[1,2‐d:4,5‐d’]bis[1,3]dioxole (4ClBD). Synthesis of poly(SOC)s was confirmed by NMR and IR spectrometry. The poly(SOC)s obtained from BCFL or BCSPC were soluble in common organic solvents. The glass transition temperature of the poly(SOC)s was not detected by differential scanning calorimetry (DSC) in the range of 50–300 °C. The 10 wt % decomposition temperature of the poly(SOC)s was found to be above 400 °C. These results indicated the high thermal stability of the poly(SOC)s. Soluble poly(SOC)s could be possessed to form a film on a glass plate by the spin coat method. The obtained polymer films were 0.2 μm in thickness with 95% light transmission in the optical wavelength range. These results suggested that the Cardo or bent structure may block the packing of the main‐chain of the structure, which improves the solubility of the polymers, increases transparency, and enhances the thermal stability of SOCs. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1409‐1416     

Organic–inorganic bonding in chitosan–silica hybrid networks: Physical properties

Novel biomaterials are needed for bone tissue repair with improved mechanical performance compared to classical bioceramics. The objective of this work was to characterize a hybrid filler material, which is capable to coat as a thin film porous scaffolds improving their mechanical properties for bone tissue engineering. The hybrid filler material is a blend of chitosan and silica network formed through in situ sol–gel using tetraethylortosilicate and 3‐glycidoxypropyltrimethoxysilane (GPTMS) as silica precursors. The hypothesis was that the epoxy ring of GPTMS could react with the amino groups of chitosan in acidic media while it is also reacting the siloxane groups of hydrolyzed silica precursors. The formation of the hybrid organic–inorganic network was assessed by different physical techniques revealing changes in molecular mobility and hydrophilicity upon chemical reaction. Finally, the cytotoxicity of the samples was also evaluated by MTT assay. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1391–1400     

Numerical simulation of droplet ejection of thermal inkjet printheads

In this study, we present a method to predict the droplet ejection in thermal inkjet printheads including the growth and collapse of a vapor bubble and refill of the firing chamber. The three‐dimensional Navier–Stokes equations are solved using a finite‐volume approach with a fixed Cartesian mesh. The piecewise‐linear interface calculation‐based volume‐of‐fluid method is employed to track and reconstruct the ink–air interface. A geometrical computation based on Lagrangian advection is used to compute the mass flux and advance the interface. A simple and efficient model for the bubble dynamics is employed to model the effect of ink vapor on the adjacent ink liquid. To solve the surface tension‐dominated flow accurately, a hierarchical curvature‐estimation method is proposed to adapt to the local grid resolution. The numerical methods mentioned earlier have been implemented in an internal simulation code, CFD3. The numerical examples presented in the study show good performance of CFD3 in prediction of surface tension‐dominated free‐surface flows, for example, droplet ejection in thermal inkjet printing. Currently, CFD3 is used extensively for printhead development within Hewlett‐Packard. Copyright © 2015 John Wiley & Sons, Ltd.     

Ferroelectric Coordination Polymers Self‐Assembled from Mesogenic Zinc(II) Porphyrin and Dipolar Bridging Ligands

A new class of ferroelectric coordination‐based polymers has been developed by the self‐assembly of lipophilic zinc porphyrin ( ZnP ) and ditopic bridging ligands. The ligands contain dipolar benzothiadiazole or fluorobenzene units, which are axially coordinated to ZnP with the dipole moments oriented perpendicular to the coordination axes. The coordination‐based polymers show ferroelectric characteristics in the liquid crystalline state, as revealed by distinctive hysteresis in the polarization–electric field (P–E) loops and inversion current peaks in current–voltage (I–V) loops. The observed ferroelectric properties are explainable by flip–flop rotation of the dipolar axle ligands induced by the applied electric field, as demonstrated by the positive‐up–negative‐down (PUND) measurements. The present system provides a new operating principle in supramolecular ferroelectrics.     

Regular conjugated terpolymers comprising two different acceptors and bithiophene donor in repeating group: Effect of strong and weak acceptors on semiconducting properties

Diketopyrrolopyrrole (DPP)‐based terpolymers—P(DPP‐TPyT) and P(DPP‐T3MTT)—bearing bithiophene donating groups and weak accepting units such as pyridine (Py) or methyl thiophene‐3‐carboxylate (3MT), in the polymer backbone, were successfully synthesized. Although the two polymers had similar physical and electrochemical properties, grazing incidence X‐ray diffraction patterns of P(DPP‐TPyT) and P(DPP‐T3MTT) showed mixed and edge‐on orientations, respectively, in thermally annealed films. Accordingly, the P(DPP‐T3MTT) showed twice the hole mobility of P(DPP‐TPyT) in a thin‐film transistor, and a blended film of P(DPP‐T3MTT) and [6,6]‐phenyl‐C71‐butyric acid methyl ester (PC₇₁BM) showed better power conversion efficiency in a polymer solar cell. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1339‐1347     

Synthesis and liquid crystalline behavior of bulky poly(methacrylamide)s

N‐(Bis(4‐(2‐ethylhexyloxy)phenyl)(phenyl)‐methyl)methacrylamide was synthesized and polymerized via reversible addition‐fragmentation chain‐transfer (RAFT) polymerization. The chain‐transfer agent (4‐cyano‐4‐(phenylcarbonothioylthio) pentanoic acid (CPADB)), combined with a chiral additive, and a radical initiator yielded polymers with dispersities between 1.2 and 1.4. At low concentrations, the polymers are soluble in hexanes and chloroform while at higher concentrations they swell in these solvents. Characterization of the polymers by wide‐angle X‐ray scattering (WAXS) revealed an interplanar distance of 19.0 Å. The WAXS data combined with polarized optical microscopy support a lamellar crystallization and lyotropic liquid crystalline behavior in hexanes and chloroform. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2563–2568     

Synthesis of tertiary amine‐based pH‐responsive polymers by RAFT Polymerization

Well‐defined tertiary amine‐based pH‐responsive homopolymers and block copolymers were synthesized via reversible addition‐fragmentation chain transfer (RAFT) polymerization using 4‐cyanopentanoic acid dithiobenzoate (CPAD) as the RAFT agent for homopolymers and a poly(ethylene glycol) (PEG) macro‐RAFT agent for the block copolymers. ¹H NMR and gel permeation chromatography results confirmed the successful synthesis of these homopolymers and block copolymers. Kinetics studies indicated that the formation of both the homopolymers and the block copolymers were well defined. The pKa titration experiments suggested that the homopolymers and the related block copolymers have a similar pKa. The dynamic light scattering investigation showed that all of the block copolymers underwent a sharp transition from unimers to micelles around their pKa and the hydrodynamic diameter (D_h) was not only dependent on the molecular weight but also on the composition of the block copolymers. The polymer solution of PEG‐b‐PPPDEMA formed the largest micelle compare to the PEG‐b‐PDPAEMA and PEG‐b‐PDBAEMA with a similar molecular weight. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1010–1022     

Molecular dynamic study of dielectric polarization and ferroelectricity in a model polar polymer

Molecular dynamics simulations are used to explore the polarization response of a lamellar crystal consisting of folded chains of a highly simplified model polar polymer. The system is based on a united atom model of polyethylene with constrained bond lengths and bond angles, and it is endowed with artificial partial charges placed on the united atoms to give it a simple polar character. Simulations performed with various temperatures, electric field directions, and electric field application histories reveal a complicated sequence of reorientation processes, including pronounced ferroelectric behavior. The sequence includes a weak, temperature‐independent prompt response, and a slow‐rising delay regime with stretched exponential behavior and thermally‐activated reorientation parameters consistent with trans‐gauche (TG) barrier crossings in the amorphous phase. When the delay regime has progressed sufficiently, a primary large‐amplitude response due to organized rotation of large subsegments in the crystalline phase occurs in a rapid manner that requires relatively few TG barrier crossings. A final, extremely slow rise in residual polarization completes the sequence. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 740–759     

Tailorable PC71BM Isomers: Using the Most Prevalent Electron Acceptor to Obtain High‐Performance Polymer Solar Cells

Despite being widely used as electron acceptor in polymer solar cells, commercially available PC₇₁BM (phenyl‐C₇₁‐butyric acid methyl ester) usually has a “random” composition of mixed regioisomers or stereoisomers. Here PC₇₁BM has been isolated into three typical isomers, α‐, β₁‐ and β₂‐PC₇₁BM, to establish the isomer‐dependent photovoltaic performance on changing the ternary composition of α‐, β₁‐ and β₂‐PC₇₁BM. Mixing the isomers in a ratio of α/β₁/β₂=8:1:1 resulted in the best power conversion efficiency (PCE) of 7.67 % for the polymer solar cells with PTB7:PC₇₁BM as photoactive layer (PTB7=poly[[4,8‐bis[(2‐ethylhexyl)oxy]benzo[1,2‐b:4,5‐b′]dithiophene‐2,6‐diyl][3‐fluoro‐2‐[(2‐ethylhexyl)carbonyl]thieno[3,4‐b]thiophenediyl]]). The three typical PC₇₁BM isomers, even though sharing similar LUMO energy levels and light absorption, render starkly different photovoltaic performances with average‐performing PCE of 1.28–7.44 % due to diverse self‐aggregation of individual or mixed PC₇₁BM isomers in the otherwise same polymer solar cells.     

Interactive Thermal Effects on Metal–Organic Framework Polymer Composite Membranes

Polymeric membranes are important tools for intensifying separation processes in chemical industries, concerning strategic tasks such as CO₂ sequestration, H₂ production, and water supply and disposal. Mixed‐matrix and supported membranes have been widely developed; recently many of them have been based on metal–organic frameworks (MOFs). However, most of the impacts MOFs have within the polymer matrix have yet to be determined. The effects related to thermal behavior arising from the combination of MOF ZIF‐8 and polysulfone have now been quantified. The catalyzed oxidation of the polymer is strongly affected by the MOF crystal size and distribution inside the membrane. A 16 wt % 140 nm‐sized ZIF‐8 loading causes a 40 % decrease in the observed activation energy of the polysulfone oxidation that takes place at a temperature (545 °C) 80 °C lower than in the raw polymer (625 °C).